ALARMS EQUIPMENT BV-2.1MP

1. General Introduction     Due to the booming of mobile phone subscribers, the Service Operators are adding thoundsands of BTS into their network. The problem is how to reduce the cost for station attendants meanwhile keeping adding more BTS. That is the reason why Alarm Equipment BV-2.1MP is the right solution for remote management, monitoring and controlling to maintain the operating conditions at the station.     BV-2.1MP can control remotely the air conditioner and send the alarming indicator and all operating condition information to the OMC that is far away from the BTS. This alarm equipment having following key features: Temperature alarm Invasion alarm Smoke alarm Air-conditioner control & alarm
BV-2.1MP has been tested at severe conditions by CT-IN R&D Group. The equipment working normally in severe climate condition, compatible with most types of air-conditioners, easy to use, easy to connect with many types of sensors and easy for future expansion:     KEY FEATURES: Easy to install, operate and maintain Professional architecture design Menu system is easy to use Low power consumption. Compact design High Reliability & Durability Low cost.
The block structure of the BV-2.1MP Alarm Equipment is described below:
Go to the top
2. TECHINICAL SPECIFICATON
Dimension H x W x D               280 x 360 x 95 (mm) Input Voltage AC 380V/50Hz (L1, L2, L3, N) or 220V/50Hz (L, N) + 100 mA (Normal mode). + 300 mA (Charge mode). DC 12V/7Ah (built-in). + 12h charging. + Operate continuously from 8 to 10 hours. Output Voltage Two separated outputs 220V/50Hz - 12.5Amp. Max. Temperature Storage: -20 to 80oC Operation: 0 to 50oC Connection Connect to to BTS through ABIS alarming connection interface from Motorola. Quantity: 04 NC port (N.C - Normal Close). Timing characteristics Periodic timing: 15' - 1h - 2h - .. -24h. Start delay time: 30s to 10' Alarms receiving & sending time: < 0.5 sec. Alarms reset time: not longer than 30s. Display Monitor Màn hình tinh thể lỏng LCD 20 ký tự x 2 dòng, đèn backlight dễ nhìn. AC power & battery status LED indicators. The key board with 6 keys is easy to use. Other features Resolution 8-bit (accuracy rate < 0.4%) for measured current and temperature Can connect to any alarm sensor (such as: temperature sensor, smoking sensor, infrareds sensor…) by optical isolated input. DC 12V Voltage for sensor with maximum 500mA current. Solid State Relay. Low battery alarm and automatically battery charging. Auto power down, self test. Menu, monitor and LED indicators: simple, clear and friendly. All parameters are configured by keyboard and store in EEPROM memory (with has life time > 10 years) Comply with all industrial standards.

Go to the top